活性炭吸附+催化燃燒處理系統是將吸附材料裝填在固定床中，再將吸附床與催化燃燒裝置組合成凈化處理系統。該工藝系統非常適合處理大氣體量、低濃度的VOCs廢氣，凈化效率高，運行節能其單套系統的廢氣處理量可以從幾千m3/h到十幾萬m3/h，已普遍應用于汽車噴涂、印刷、醫藥化工等行業。特點:

 

      1、操作方便:設備工作時，實現自動控制。

 

      2、能耗低:設備啟動僅需15-30分鐘升溫至起燃溫度(有機廢氣濃度較高時)耗能僅為風機功率。3、安全可靠:設備配有阻火系統、防爆泄壓系統、超溫報警系統及*的自控系統

 

      4、阻力小，凈化效率高:采用當今*的貴金屬鈀、鉑浸漬的蜂窩狀陶瓷載體催化劑，比表面積大。5、占地面積小:僅為同行業同類產品的70%-80%，且設備基礎無特殊要求。

 

      The act ivated carbon adsorption + catalytic combustion treatment system is to fill the adsorption material in a fixed bed,ａnd then combine the adsorption bed with the catalytic combustion device into a purification treatment system. The processsystem is very suitable for treating large gas volume and low concentration of VOCs exhaust gas, and has high pur ificat ionefficiency and remarkable energy saving effect. The exhaust gas treatment capacity of a single system can be from severalthousａnd m3/h to hundreds of thousands of m3/h, which has been widely used. In the automotive spray, printing, pharmaceuti-cal and chemical industr ies. Features:

 

      1. Convenient operation: automatic control is real ized when the equipment is working.

 

      2，I ow energy consumption: the equipment starts only 15-30 minutes to warm up to the light-off temperature (when the or gan-ic waste gas concentration is high)， the ener gy consumption is only the fan power .

 

      3，safe and reliable: the equipment is equipped with fire retardant system, explosion-proof pressure relief system, over-temperature alarm system and advanced automatic control system

 

      4，low resistance, high purification efficiency: the use of today's advanced precious metal palladium, plat inum impregnatedhoneycomb ceramic carrier catalyst， large specific surface area.

 

      5，small footprint: only 70%-80% of similar products in the same industry, and no special requir ements for equi pment base.