基本參數 Basic Parameters
雙溫包補償式感溫器 Double-probe compensation
| 型號 Model | 公稱感溫包容積比 Nominal Volume ratio of probe V(一)/V(二) V(first)/V(second) | 感溫包（一） Probe(second) | 感溫包（二） Probe(second) | 反應時間S Response time | 感溫包長度mm Length of probe | 柱塞提升度mm Max lifting height of plunger | ||
| 行程變化率 mm/℃ Stroke change rate | 適用溫度范圍℃ Temperature adjusting range | 行程變化率 mm/℃ Stroke change rate | 適用溫度范圍℃ Temperature adjusting range | |||||
| S4-0.5A | 0.35/1 | 0.5 | 0～120 | 0.175 | 20～30 | ≤25 | 420 | 12 |
| S4-0.5B | 0.5/1 | 0.25 | ||||||
| S4-0.5C | 0.7/1 | 0.35 | ||||||
| S4-0.5D | 1/1 | 0.5 | ||||||
| S4-0.5E | 1.4/1 | 0.7 | ||||||
說明Note：
1、毛細管標準長度為-3米，需要其他長度，應在訂貨時說明，長度為20米。
The standard capillary tube length is three (3) meters, other lengts up to twenty (20) meters are available upon request specified in your order.
2、反應時間系指在液體介質內。
The response time means the time responsed in liquid medium.
單溫包感溫器 Single-probe temperature sensor
| 型號 Model | 行程變化率mm/℃ Stroke changerate | 適用溫度范圍℃ Temperature adjusting range | 反應時間S Response time | 感溫包長度mm Length of probe | 柱塞提升度mm Max lifting height of plunger |
| D4-0.3 | 0.25 | 0～160 | ≤25 | 420 | 12 |
| BD4-0.3 | 150 | ||||
| D4-0.5 | 0.5 | 0～120.40～160 | 420 | ||
| BD4-0.5 | 300 | ||||
| D4-1.0 | 1 | 0～60.30～90 60～120 | 420 | ||
| BD4-1.0 | 400 |
說明Note：
1、毛細管標準長度為-3米，需要其他長度，應在訂貨時說明，長度為20米。
The standard capillary tube length is three (3) meters, other lengts up to twenty (20) meters are available upon request specified in your order.
2、反應時間系指在液體介質內。
The response time means the time responsed in liquid medium.
蒸汽調節閥 Steam control valve
| 型號 Model | 公稱通徑mm Nominal bore | 適用介質 Using medium | 熱源介質 | 材料 | |||
| 蒸汽 Steam | 熱水 Hot water | ||||||
| 額定蒸汽流量kg/h | 允許壓差MPa(kgf/cm2) Max allowable prssure differense | 額定流量kg/h | 允許壓差MPa(kgf/cm2) Max allowable prssure differense | ||||
| 1F1.6-15 | 15 | 蒸汽熱水 Steam hot water | 110 | 1.764 | 0.85 | 1.59 | 鑄鐵 Castiron 鑄鋼 Cast steel 不銹鋼 Stainless Steel |
| 1F1.6-20 | 20 | 200 | 0.735 | 1.54 | 0.686 | ||
| 1F1.6-25 | 25 | 320 | 0.440 | 2.26 | 0.441 | ||
| 1F1.6-32 | 32 | 520 | 3.725 | 4.00 | 3.629 | ||
| 2F1.6-40 | 40 | 800 | 2.157 | 6.00 | 1.569 | ||
| 2F1.6-50 | 50 | 1400 | 1.863 | 9.5 | 1.529 | ||
| 2F1.6-65 | 65 | 2000 | 0.980 | 15.2 | 0.980 | ||
| 2F1.6-80 | 80 | 3200 | 0.784 | 24 | 0.746 | ||
| 2F1.6-100 | 100 | 5000 | 0.588 | 37.00 | 0.530 | ||
| 2F1.6-125 | 125 | 7812 | 0.3 | 58 | 0.3 | ||
| 2F1.6-150 | 150 | 11250 | 0.19 | 83 | 0.19 | ||
三通熱水調節閥 3 way hot water control valve
| 型號 Model | 公稱通徑 Nominal bore | 適用介質 Using medium | 額定熱水流量t/h Rated hot water flow rate | 材料 Material |
| 3F1.6-2.5 | 25 | 熱水 (hot water) | 2.26 | 鑄鐵 鑄鋼 不銹鋼 castiron cast steel stainless steel |
| 3F1.6-32 | 32 | 4.00 | ||
| 3F1.6-40 | 40 | 6.00 | ||
| 3F1.6-50 | 50 | 9.5 | ||
| 3F1.6-65 | 65 | 15.5 | ||
| 3F1.6-80 | 80 | 24 | ||
| 3F1.6-100 | 100 | 37 |
型號表示方法 The model indicating method is listed below
蒸汽調節閥 Steam control valve:
三通熱水調節閥 Three (3) way hot water control valve
3 F 1.6 - 100
100 公稱通徑mm Nominal bore(in mm)
1.6 公稱壓力MPa Nominal pressure (in Mpa)
F 連接方式：F-法蘭 Connection method:F-flange connection
3 三通 Three (3) way
外形和安裝尺寸 Outline and installation dimensions
| 雙溫包補償式感溫調節器外形和安裝尺寸 The outline and installation dimensions of double-probe compensation temperature controller | 螺旋形單溫包感溫調節器外形和安裝尺寸 The outline and installation dimensions of spiral single-probe temperature controller |
 | |
棒形單溫包感溫調節器外形和安裝尺寸
The outline and installation dimensions of rod single-probe temperature controller
| 型號 Model | L | E | G | G |
| BD4-0.3 | 150 | 22 | ZG1" | M36×2 |
| BD4-0.5 | 300 | 22 | ZG1" | M36×2 |
| BD4-1.0 | 400 | 23 | ZG1" | M36×2 |
| BD8-1.0 | 710 | 25 | G1 1/4" | M36×2 |
1F-1.6型蒸汽調節閥外形和安裝尺寸
The outline and installation dimensions of 1F-1.6 steam control valve
2F-1.6型蒸汽調節閥外形和安裝尺寸
The outline and installation dimensions of 2F-1.6 steam control valve
3F1.6-25～50熱水調節閥外形和安裝尺寸
The outline and installation dimensions of 3F1.6-25～50 hot water control valve
三通溫度自動調節器 氣動式溫度自動調節器 石蠟式溫度自動調節器 電動式溫度自動調節閥 自閉式液位指示器
郝邁產品訂貨須知：
一、1.產品名稱、型號、公稱通徑 2.介質及溫度、壓力范圍 3.是否有附件、交貨期、特殊要求等以便我們的為您正確選型。
二、若已經由設計單位選定我公司的閥門型號，請您根據閥門參數直接與我們銷售訂購。
三、當您使用的場合非常重要或環境比較復雜時,請您提供設計圖紙和詳細參數，我們會為您審核與分析。我們可以為您提供問題的解決方案，包括設計、定做成套、運行服務。我們一直致力于閥門行業領域，為您提供好的閥門知識、好的服務。
感謝您訪問我們的【】,如有任何疑問，您可以致電給我們,我們一定會盡心盡力為您提供的服務。公司提供船用蝶閥、船用閘閥、船用止回閥、船用調節閥、船用減壓閥、船用呼吸閥、高速透氣閥、船用快關閥、船用自閉閥、船用旋塞閥、船用消防閥、船用通海閥、船用防浪閥、船用濾器、船用空氣帽、船用球閥、船用截止閥、船用截止止回閥、船用閥組、船用截止閥箱、船用針型閥、船用電磁閥、船用隔膜閥、船用壓力表閥等各類閥門。
