Performance characteristics and specifications of automatic hydraulic baler;
01. Output: 3-6 (waste paper) tons/hour 1.5-3 (plastic) tons/hour
02. Packing size: L1600 *W1100mm*H1830mm
03. Weight of finished product: 500～1000kg, calculated according to the package of W1100mm*H830mm*L1500mm (density: 400-600kg/m3)
04. Feed box volume: L1600*W1000mm
05. Working mode: automatic binding of hydraulic threading, iron wire use range (2.8-3.5mm).
06. Forming cutter: double-shear type (which can reduce the pressure on the side panel) replaceable blade with tooth shape to reduce the cutting resistance.
07. Oil tank volume: 2000 litres (about 10 barrels of hydraulic oil).
08. Strapping method: Number of strapping lines: 4.
09. Shearing blade: replaceable segmented tooth-shaped blade; cutting method: breakthrough type.
10. Bottom structure: roller track; interchangeable 12mm wear-resistant high-quality steel + 16mm bottom plate; reinforced main body and bottom plate.
11. Tightly packed hydraulic cylinder: D120*d80*L930mm 2/set
12. Main hydraulic cylinder: D250*d190*L2880mm 1/set
13. Body weight: about 15 tons.
14. 150T semi-automatic plastic paper packing machine footprint: L8800mm*W2000mm*H2500mm
Automatic hydraulic balerD. Automatic hydraulic baler oil pressure and power system-: (refrigerated circulation system)
01. Motor: Siemens joint venture motor (Wannan Motor)
02. Oil pump: original imported high-performance high-pressure double pump
03. Refrigeration system: The water tower refrigeration system keeps the equipment working normally below 60° for a long time.
04. Pressure throat: Original imported Italian (or German) advanced hydraulic throat.
05. Oil seal accessories: imported Japanese famous brａnd NOK products.
06. Hydraulic oil: 68# high anti-wear hydraulic oil can be used normally at minus 30°C.
07. Improvement of oil circuit: smooth oil circuit design and improve mechanical working efficiency.
08. Fittings improvement: the use of the most advanced international hydraulic system with high-efficiency flow hydraulic accessories; to ensure quality and durability.
Automatic hydraulic balerE. Electrical appliances-fully automatic micro-control system:
01. Power supply requirements: 380V/415V, X 37KW; three-phase 50HZ/60HZ.
02. PLC programmable controller----Mitsubishi products from Japan or Siemens products from Germany.
03. Control electrical products----Imported protective devices, products from Fuji and Mitsubishi in Japan; Korea
Famous brａnd alarm lights and other original imported electrical accessories.
04. 150T automatic hydraulic baler adopts LCD mechanical operation touch screen (man-machine screen) display program; displays digital parameters such as baling length and number, etc.
Prompt fault maintenance information, convenient for operators to operate.
05. Equipped with LED display of packing length, which is convenient for accurate control of packing length; simple operation and clear record.
06. Equipped with thermal cutoffs to protect the motor system from short circuit and burnout.
07. The fault of the machine and equipment is displayed on the touch screen control system, which is convenient to find the cause of the fault.
Note: The product is continuously improved, the actual product and the drawing are slightly different, and the actual product shall prevail, without notice.
Operation of the automatic hydraulic baler: 1. String the packaging string through the automatic elastic tightening device behind the vertical waste paper baler, and place it along the baling belt slot, then tie the baling belt to the bottom end of the baling slot, and rotate automatically Tighten the device 90 degrees and close the bottom door to lock it.
2. Input the material. When the material is loaded to the height of the platen, close the door tightly and press the "down" button. The equipment runs automatically and compacts. (The feeding height of materials other than cardboard can only be slightly higher than the bottom door).
Operation 3. The pressure plate moves downward and compresses to reach the maximum pressure, and then automatically returns to the fully open position. When compressing and packing constraints, the pressure plate stops at the preset position of the compressed material.
Operation 4. Open the door of the device, pass the tie rope from the front to the back, pass through the bottom wire slot and return to the front through the pressure plate wire slot, and tie the tie rope tightly by hand. Push the packing lever by hand, push the lever to a fixed position, and tighten it. Press the "Up" button, the return stroke of the cylinder will automatically turn over the bundled bundle. (No one is allowed to stａnd in front of the door when opening the next door to avoid accidental injury when the door pops open)
5. After the bale is ejected, reset the baling rod to perform the pressing action. Finally, the bale is removed, the door is closed and locked to enter the next bale cycle task.
| 模型 | TT-80T | TT-100T | TT-120T | TT-150T |
| 液壓動力 | 80噸 | 100噸 | 120噸 | 150噸 |
| 包裝尺寸（W * H * L） | 1100 * 800 *（300-1800）毫米 | 1100 * 1000 *（300-2000）毫米 | 1100 * 1100 *（300-2100）毫米 | 1100 * 1100 *（300-2100）毫米 |
| 進料口尺寸（長*寬） | 1650 * 1100毫米 | 1800 * 1000毫米 | 2000 * 1100毫米 | 2200 * 1100毫米 |
| 捆密度 | 450-550Kg / m3 | 500-600Kg / m3 | 550-650Kg /立方米 | 600-750Kg / m3 |
| 捆線 | 4線 | 4線 | 5線 | 5線 |
| 能力 | 4-7噸/小時 | 7-10噸/小時 | 8-13噸/小時 | 10-16噸/小時 |
| 功率 | 37KW / 50馬力 | 55KW / 75馬力 | 67KW / 90馬力 | 93KW / 124馬力 |
| 機器尺寸（長*寬*高）mm | 7900 * 3500 * 2300 | 8900 * 4050 * 2400 | 9700 * 4330 * 2400 | 10000 * 4250 * 2500 |
| 機器重量 | 11噸 | 13.5噸 | 17噸 | 20噸 |
